Firmware Upgrade
Actiontec periodically posts rmware upgrades that may include
enhancements and/or bug xes for the Adapter. To upgrade the Adapter’s
rmware:
1.
Go to!
www.actiontec.com/support!
for information about the latest rmware available for the Adapter. If
the version is the same as the current version applied to the Adapter,
there is no need to upgrade the rmware. If the online version is
newer, download it to a computer.
2.
Make sure that the computer with the new rmware is connected to
the Adapter via Ethernet cable.
3.
Locate the rmware le by clicking Choose File.
4.
Select the le, then click Start to Upgrade.
5.
e Adapter’s rmware is updated. is may take a few minutes.
When the Adapter’s Status screen reappears, the rmware will have
been updated.
To Next Page
Loading...
