Need help?Do you have a question about the ActionTec GT724WGR and is the answer not in the manual?
Lists the hardware and software requirements for using the modem.
Details the technical specifications and capabilities of the modem.
Describes the lights and ports on the front of the modem.
Explains how to reset the modem to factory defaults.
Guides users on how to access the initial setup interface.
Instructions on how to change the modem's administrative password.
How to view the status of the DSL and Internet connection.
Shows the status of the DSL line synchronization and errors.
Guides users to the wireless configuration interface.
Performs basic wireless network setup like SSID and password.
Configuration for Wi-Fi Protected Access security.
Restricts network access based on MAC addresses.
How to navigate to the advanced configuration menus.
Manages the Dynamic Host Configuration Protocol server settings.
Modifies the modem's local IP address and subnet mask.
Guides users to the wired security configuration interface.
Configures the modem's firewall for network protection.
Blocks access to specific websites for network computers.
Guides users to the modem's utility functions.
Resets the modem to its original factory configuration.
Restarts the modem to apply settings or resolve issues.
Solutions for problems with local network connectivity.
Steps to resolve issues preventing internet access.
Instructions to find a computer's current IP address.
Basic information like model number and standards.
Specifies the indoor and outdoor range of the wireless signal.
Step-by-step guide to set a static IP address on Windows 2000.
Step-by-step guide to set a static IP address on Windows XP.
Step-by-step guide to set a static IP address on Windows Vista.
To Next Page
General
