EasyManua.ls Logo

ActionTec MI424-WR - Page 91

ActionTec MI424-WR
171 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
88
Actiontec Wireless Broadband Router User Manual
89
Chapter 6 Configuring the Router’s Security
Two sets of rules can be configured: input rules and output rules. Each set of rules
comprises three subsets: initial rules, network devices rules, and final rules. These
subsets determine the sequence by which the rules will be applied. Following is a
description of the set ordering for inbound and outbound packets.
Inbound Packets - Input Rule Sets
• Initial rules
• All rules defined for the network device on which the packet is
• Local servers rules from the local server tab in the security screen
• Rules to accept all the packets on a device in case the firewall check
box “Internet Connection Firewall” in the connection settings screen is
unchecked
• Remote administration rules from the remote administration tab
• DMZ host rules from the DMZ tab
• Final rules
Outbound Packets - Output Rules Sets
• Initial rules
• All rules defined for the network device on which the packet is
• Rules to accept all the packets on a device in case the firewall check
box “Internet Connection Firewall” in the connection settings screen is
unchecked
• IP/hostname filtering rules and access control rules from the tabs in the
security screen
• Final rules
There are numerous rules automatically inserted by the firewall in order to provide
improved security and block harmful attacks.

Table of Contents