OVERVIEW
Thank you for selecting the Active Air AADHC602P or AADHC1002P dehumidifier. This manual
details the proper use and maintenance of your dehumidifier. Please take a few minutes to read this
manual, and please keep it for further reference.
Active Air industrial-grade dehumidifiers provide powerful and reliable dehumidification solutions
for grow room environmental control. These units have been designed for improved efficiency,
performance and increased water removal capabilities. The digital humidistat is programmable
for precise and automatic control of indoor humidity levels. The units can be operated 24/7 for
continuous use or programmed for timed operation.
These updated dehumidifiers are equipped with automatic restart, allowing them to be used with
external humidity controllers. The digital humidistat display has a lithium ion battery backup that
maintains programmed settings during unexpected power outages or after daily on/off cycles. The
internal air filter collects airborne particles helping keep your indoor environment and plants as
healthy as possible. The filter is washable for repeated use. All three models are ETL-listed. They have
a one-year warranty and are equipped with caster wheels for easy and secure placement.
For information on additional Active Air products please visit Hydrofarm.com.
FEATURES
• Removes up to 80 pints per day (AADHC602P)/110 pints per day (AADHC1002P)
• Automatic Restart (humidity controller compatible)
• Programmable humidity setting
• Timed operation
• Continuous draining option
• Low decibel output
• Digital humidistat control
• Caster wheels for easy mobility and storage
WARNINGS
• Please follow the below safety guidelines when using the dehumidifier:
• Unplug the power supply when cleaning or storing the unit.
• Do not put into water or operate near a water source.
• Do not place the unit near the heating equipment or flammable substances .
• Keep fingers and other objects away from air inlets and outlets.
• Do not stand on the unit.
• Do not cover the louvered panels on the machine or it will overheat.
• Install the drainpipe facing downward so condensation will flow out of the pipe.
• If the power cable is damaged, please contact a licensed electrician for replacement or repair.
SPECIFICATIONS
MODEL# AADHC602P AADHC1002P
Rated capacity
Up to 40 Pints/Day @ 80°F, 60% RH
Up to 80 Pints/Day @ 86°F, 80% RH
Up to 70 Pints/Day @ 80°F, 60% RH
Up to 1100 Pints/Day @ 86°F, 80% RH
Power supply 115VAC/60Hz 115VAC/60Hz
Power consumption and current
550W/4.05A @ 80°F, 60% RH
520W/4.65A @ 86°F, 80% RH
635W/6.0A @ 80°F, 60% RH
728W/6.75A @ 86°F, 80% RH
Refrigerant type & capacity R410A/11.3 oz (320 g) R410A/11.6 oz (330 g)
Maximum design pressure
High Side: 522 psig (3.6MPa)
Low Side: 240 psig (1.65MPa)
High Side: 522 psig (3.6MPa)
Low Side: 240 psig (1.65MPa)
4
To Next Page
Loading...