To Next PageTo Next Page
Need help?Do you have a question about the Active Products XE03 and is the answer not in the manual?
General| Brand | Active Products |
|---|---|
| Model | XE03 |
| Category | Pressure Washer |
| Language | English |
Lists key specifications like max pressure, power source, water flow, and electrical requirements.
Details the 1-year warranty for materials and workmanship, covering the electric motor and pump.
Basic precautions for safe operation, including electrical safety, usage near children, and proper handling.
Describes the pressure washer's stop device linked to the trigger and the main ON/OFF switch.
Warns about risks of electric shock from improper outlet connection and advises consulting an electrician.
Provides guidelines and warnings for using extension cords, including gauge, length, and condition.
Advises using only pressure washer-approved detergents to avoid machine damage and voiding the warranty.
Lists and identifies all parts of the pressure washer with their corresponding part numbers.
Instructions for preparing the work area before starting, including object removal and closing openings.
Specifies requirements for the cold water supply, including hose diameter, flow rate, and temperature.
Advises against using contaminated water and checking the water filter to prevent unit damage.
Explains how to adjust the spray nozzle for high/low pressure and 360-degree rotation.
Warns against adjusting the spray while the unit is operating due to the aggressive nature of the spray.
Details the process of applying detergent at low pressure for effective cleaning on dry surfaces.
Advises using only detergents specifically recommended for pressure washers to prevent damage.
Instructions for flushing the detergent system with clean water after use to prevent clogging.
Instruction to disconnect the garden hose from the unit's water inlet.
Procedure to release any residual water pressure from the system by pressing the trigger.
Instruction to turn the main power switch to the OFF position.
Instruction to unplug the power cord from the electrical outlet.
Instruction to engage the safety lock on the gun trigger.
Warning about turning off water and squeezing trigger to depressurize, preventing injury.
Caution that failure to clean the detergent system properly can lead to clogging and inoperability.
Lists chemicals that should never be used with the pressure washer due to potential damage.
Steps to follow when taking a break of five minutes or more, including safety measures.
Detailed steps for optimal winterizing to protect the pump and internal parts from freezing and rust.
An alternative procedure for protecting the pressure washer from winter damage by draining.
Instruction to drain the gun assembly of any remaining water by aiming downwards and squeezing the trigger.
Advises regular cleaning and lubrication of connections on hoses, gun, and spray wand with non-water soluble grease.
Instructions on how to clean clogged spray tips using a needle or fine instrument to remove deposits.
Steps to clean the water inlet screen to ensure proper water flow and prevent pump damage.
Lists common causes and solutions when the motor fails to start, such as switch position or power cord issues.
Addresses issues where the unit is not achieving sufficient pressure, including hose diameter and water supply.
Solutions for problems causing inconsistent output pressure, such as clogged nozzles or air in the pump.
