Active Products XE03 - Winterizing and Long-Term Storage; Optimum Winterizing Procedure; Quick Winterizing Procedure; Draining Gun Assembly Caution

14
CAUTION
%SBJOHVOBTTFNCMZPGBOZSFNBJOJOHXBUFS"JNHVOEPXOXBSETBOETRVFF[FUSJHHFS
WINTERIZING AND LONG-TERM STORAGE
0QUJNVN8JOUFSJ[JOH1SPDFEVSF
Winterizing your pressure washer will help protect and prolong its life. We strongly
SFDPNNFOEZPVGPMMPXUIFCFMPXTUFQTVTJOH1SFTTVSF8BTIFS1VNQ4BWFS
5IJTXJMMLFFQUIFJOUFSOBMQBSUTMVCSJDBUFEQSPUFDUFEGSPNSVTUBOEQSFWFOUTUIFQVNQ
from freezing.
1. Connect Pressure Washer Pump Saver hose onto the adaptor and quick-connect
coupling.
2. Depress button on top of Pump Saver container.
$POUJOVFVOUJMnVJEFYJUTUIFQSFTTVSFIPTF
4. Remove the hose from pump inlet.
2VJDL8JOUFSJ[JOH1SPDFEVSF
If you cannot do the Optimum Winterizing
QSPDFEVSFZPVDBOTUJMMQSPUFDUZPVSQSFT-
sure washer from winter-damage by doing
below:
1. Disconnect all water connections.
5VSOPOUIFNBDIJOFGPSBGFXTFDPOET
until the remaining water in the pump
exits. Turn off immediately.
3. Do not allow high-pressure hose to
become kinked.
4. Store the machine and accessories in
a room that does not reach freezing
temperatures. Do not store near furnace
or other sources of heat as it may dry out
the pump seals.
PUMP SAVER
Recommended: Pressure Washer Pump
Saver (39-8602-0)