ASSEMBLY AND OPERATING INSTRUCTIONS
"EKVTUBCMF4QSBZ/P[[MF
High (+) & low (-) pressure sprays:
The spray nozzle can be adjusted
between high and low pressure by
turning the nozzle as shown.
8PSLJOHXJUIEFUFSHFOUFOTVSFTBRVJDLTPBLJOHPGUIFEJSUBOEBMMPXTUIFIJHIQSFTTVSF
water to penetrate and remove the dirt more effectively. Always spray detergent on a dry
TVSGBDFEPOPUQSFTPBLBSFB8FUUJOHUIFTVSGBDFmSTUEJMVUFTUIFEFUFSHFOUBOESFEVDFT
its cleaning ability.
To apply detergents you must be operating at low-pressure. This provides a gentle applica-
UJPOPGEFUFSHFOUXJUIUIFQSFTTVSFFRVJWBMFOUUPBMPXFTUHBSEFOIPTF5IFIJHIQSFTTVSF
setting is used for cleaning; you cannot apply detergents when working at high-pressure.
Always test detergent in an inconspicuous area before use.
CAUTION
0OMZVTFDMFBOJOHEFUFSHFOUTSFDPNNFOEFEGPSQSFTTVSFXBTIFST
USING THE ACCESSORIES
WORKING WITH DETERGENTS
Engage gun safety lock.
Set the adjustable wand to low-pressure
by turning the nozzle with +/- pressure
marking.The nozzle must be set in the
low-pressure position to apply detergent.
360 degree rotation of the nozzle:
8JUIPVUUVSOJOHUIFHVOBEKVTUUIFTQSBZ
to desired angle by turning the nozzle with
360° marking as shown.
CAUTION
+FUTQSBZBEKVTUNFOUJTWFSZBHHSFTTJWF%POPUBEKVTUXIJMFTQSBZJOH