Active Products XE03 - Cleaning and Maintenance; Connections Maintenance; Spray Tip Cleaning; Water Filter Screen Maintenance

15
CLEANING AND MAINTENANCE
Connections
Connections on pressure washer hoses; gun and spray wand should be cleaned regularly
and lubricated with non-water soluble grease.
4QSBZ5JQT0OMZ
Clogging of the spray tips causes the pump
pressure to be too high and cleaning is im-
mediately required. You can clean the spray
UJQTCZDBSFGVMMZJOTFSUJOHUIFOFFEMFPSB
UIJOTIBSQJOTUSVNFOUJFQBQFSDMJQJOUP
the tip to rid it of deposits.
8BUFS'JMUFS4DSFFO
The pressure washer is equipped with a wa-
ter inlet screen to protect the pump. If the
TDSFFOJTOPULFQUDMFBOUIFnPXPGXBUFS
to the pressure washer will be restricted
and the pump may be damaged.
5PDMFBOJOOFSXBUFSTDSFFOSFNPWF
quick-connector and remove the filter
screen from the pump inlet.
2. Rinse screen until it is free of debris
and blockage.
3. Replace screen and quick-connector im-
mediately to prevent any foreign matter
from entering the pump.
E
G2