Active SE02 - Purging Air from the System; Draining Unit for Storage; Powering On the Unit

9
5. Assembly Instructions (cont.)
5.4 Assembly (cont.)
Assembly Instructions
10 11
Purge air by squeezing the trigger on the gun
until there is a steady stream of water.
Push ON/OFF button, switch is set in ON position,
machine is ready to operate.
CAUTION
Drain unit aer each use (for storage):
remove water connection, turn ON the
machine for a few seconds and press gun
trigger to drain remaining water in the pump.
Turn OFF immediately.
PURGING
ON / OFF button