Actron OBD II PocketScan Code Reader CP9125 User Manual

3
• Always use caution when working around ignition coil,
distributor cap, ignition wires, and spark plugs. Components
can produce a High Voltage while engine is running.
• Battery acid is caustic. If contacted, rinse with water or
neutralize with a mild base (i.e. baking soda). If in eyes,
flush with water and call a physician immediately.
• Never smoke or have open flames near vehicle. Vapors
from gasoline and battery during charge are explosive.
• Never use the PocketScan
TM
Code Reader if internal
circuitry has been exposed to moisture. Internal shorts
could cause a fire and damage.
• Always turn ignition key OFF when connecting or
disconnecting electrical components, unless otherwise
instructed.
• Some vehicles are equipped with safety air bags. Follow
vehicle service manual cautions when working around air
bag components or wiring. Note, air bag can still open
several minutes after ignition key is off.
• Always follow vehicle manufacturer’s warnings, cautions and
service procedures.

Actron OBD II PocketScan Code Reader CP9125 Specifications

General

Power Source	Vehicle's OBD II port
Compatibility	OBD II compliant vehicles
Display	LCD
Connectivity	OBD II
Features	Reads and erases diagnostic trouble codes (DTCs)
Functions	Diagnostic trouble code (DTC) reading and clearing
Supported Protocols	J1850 PWM, J1850 VPW, ISO9141-2, ISO14230-4 (KWP2000), ISO15765-4 (CAN)