Actron OBD II PocketScan Code Reader CP9125 User Manual

5
MIL Conditions:
MIL (Malfunction Indicator Lamp) Status displays the
state of the vehicles computer module(s).
• MIL ON: Indicates that the
Malfunction Indicator Lamp on
vehicle should be ON indicating
a possible emissions problem.
√ If the MIL Status is ON and the MIL is not illuminated with
the engine running, then a problem exists in the MIL
circuit.
• MIL OFF: Indicates the
Malfunction Indicator Lamp
should be off and there should
be no emission problems.
√ Some manufacturers will turn the MIL off if a certain
number of drive cycles occur without the same fault being
detected.
√ Diagnostic Trouble Codes related to a MIL are erased
from the computer’s memory after 40 warm-up cycles if
the same fault is not detected.
MIL ON
MIL OFF





Actron OBD II PocketScan Code Reader CP9125 Specifications

General

Power Source	Vehicle's OBD II port
Compatibility	OBD II compliant vehicles
Display	LCD
Connectivity	OBD II
Features	Reads and erases diagnostic trouble codes (DTCs)
Functions	Diagnostic trouble code (DTC) reading and clearing
Supported Protocols	J1850 PWM, J1850 VPW, ISO9141-2, ISO14230-4 (KWP2000), ISO15765-4 (CAN)