To Next PageTo Next Page
Need help?Do you have a question about the ActronAir CRV180S and is the answer not in the manual?
General| Model | CRV180S |
|---|---|
| Cooling Capacity | 17.0 kW |
| Heating Capacity | 19.0 kW |
| Airflow | 1400 l/s |
| Power Supply | 415/3/50 V/Ph/Hz |
| Refrigerant | R410A |
Details about the manual, product checks, and adherence to codes and standards.
Overview of system design, efficiency, durability, flexibility, and safe refrigerant practices.
Information on the system's environmental friendliness and use of R-410A refrigerant.
Critical safety guidelines, including electrical hazards, fan precautions, and work assessment.
Covers refrigerant handling, service equipment, pre-installation checks, and manual access.
Overview of outdoor unit components and steps for preparing it for installation.
Detailed unit dimensions, required clearances, and safe lifting methods for all models.
Procedures for piping, brazing, pressure testing, evacuation, and pipe length calculations.
Details on piping sizes, refrigerant charge, and subcooling/superheat charging methods.
Guidelines for safe electrical installation, power supply, and wiring compliance.
Recommendations for circuit breakers, cable sizes, and data cable shielding.
Lists allowed combinations for up to three wall controllers (NEO, LR7-1, LC7-2).
Diagrams and specs for wiring configurations, including controller and sensor connections.
Setup for demand response, third-party control, and remote operation.
Guide to menu navigation, control source configuration, and third-party control setup.
Information on fan commissioning, application ranges, and performance curves for all models.
Guidelines for routine maintenance, annual checks, and condenser coil cleaning.
A template for documenting installation and commissioning results.
