ActronAir LM Series User Manual

9
FAN
AUTO
HEAT / COOL
AUTO
HEAT / COOL
LOW COOL
ON
OFF
PROGRAM
EXIT
SELECT
SET TEMP
SET TEMP
TIMER
REPEAT /
REPEAT /
3
2
3
4
1
5
COOLING OPERATION
LM7
OFF
1 Press ON/OFF Button.
2 Press the Button until “COOL” appears on display.
3
Set the desired temperature by pressing either the
SET TEMP UP or DOWN arrow key.
Maximum temperature setting 30.•
Minimum temperature setting 16.•
For a WARMER room temperature, press the UP arrow key.•
For a COOLER room temperature, press the DOWN arrow key.•
4
Adjust the desired fan speed by pressing
the FAN Control Button.
When your air conditioner is turned ON the indoor fan can run continuously
and is indicated by the CONT indicator. This is generally preferred during the
cooling mode to ensure maximum air circulation. However, during the
heating mode this can create the effect of cool drafts. It then would be
preferable to have the indoor fan, cycle On and Off automatically with the
Outdoor Unit. This is selected by pressing the FAN button until the CONT indi-
cator is Off.
5
Press ON/OFF Button again.
The system will retain your last setting until next operation.
AUTO
HEAT/COOL

ActronAir LM Series Specifications

General

Brand	ActronAir
Model	LM Series
Category	Controller
Language	English