To Next PageTo Next PageWhy do both ActronAir Air Conditioner units emit mist?
When your ActronAir Air Conditioner restarts in HEAT mode after defrosting, mist may be emitted from both indoor and outdoor units due to moisture generated during the defrosting process.
Why does my ActronAir WRE-035CS emit dust?
Your ActronAir Air Conditioner may emit dust if it has accumulated dust during extended periods of non-use, which will be emitted when the unit is turned on. This can be mitigated by covering the unit during long periods of inactivity. At the end of a cycle, the outdoor fan will run in reverse, expelling dust and debris from coil surface.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Energy Efficiency Rating (EER) | 3.21 |
| Refrigerant | R32 |
| Indoor Unit Type | Wall Mounted |
| Power Supply | 220-240V, 50Hz |
| Coefficient of Performance (Heating) | 3.61 |
| Operating Temperature Range (Heating) | -7 ~ 24 °C |
Details electrical dangers, lockout/tagout procedures, and general warnings for safe operation.
Covers crucial cautions against improper use, water contact, and general warnings about refrigerant.
Identifies and illustrates the main parts of the indoor unit, including sensors and display.
Details optimal temperature ranges for COOL, HEAT, and DRY modes for efficient operation.
Lists and explains various features like Auto-Restart, Anti-mildew, and Active Clean.
Explains how to adjust vertical and horizontal airflow direction using the remote control.
Describes the SLEEP function for energy saving during sleep and temperature adjustment.
Details manual operation modes (FORCED AUTO/COOL) and provides cautions for its use.
Highlights electrical hazards, fan safety, and LOTO procedures before maintenance.
Lists key annual maintenance tasks like inspections, leak tests, electrical checks, and cleaning.
Provides instructions and warnings for cleaning condenser coils to maintain system performance.
Details the steps for cleaning the air filter to maintain cooling efficiency and air quality.
Provides guidance for long-term storage and pre-season inspections of the unit.
Lists critical safety conditions requiring immediate unit shutdown and professional service.
Addresses issues like unit not turning on, mist emission, noises, and odor.
Provides solutions for poor cooling/heating, unit not working, frequent cycling, and error codes.
