To Next PageTo Next PageWhat to do if my ACU-RITE 00439DI Weather Station display screen is not working?
First, check that the batteries are installed correctly. If they are, the batteries may need to be replaced. You can also reset the display by pressing the RESET button, located on the back of the display unit in the battery compartment. Note that the date and time will need to be entered after a reset.
What to do if my ACU-RITE 00439DI outdoor temperature is flashing or showing dashes?
Ensure the A-B-C switch in the battery compartments of both the display unit and sensor are switched to the same letter. You may choose A, B, or C, but both units must match to sync up. Sometimes, changing to a different channel can also help.
Why is my ACU-RITE 00439DI Weather Station temperature or humidity inaccurate?
Ensure both the display unit and 3-in-1 sensor are placed away from any heat sources or vents, and positioned away from moisture sources. The 3-in-1 sensor should be mounted at least 5 ft off the ground. You can also calibrate the indoor and outdoor temperature and humidity.
How to fix no outdoor sensor reception on ACU-RITE 00439DI?
Relocate the display unit and/or the 3-in-1 sensor, ensuring the units are within 330 ft (100 m) of each other and at least 3 feet (.9 m) away from electronics that may interfere with wireless communication, such as TVs, microwaves, or computers. Use standard alkaline batteries (or lithium batteries in the sensor when the temperature is below -4ºF/-20ºC). Do not use heavy-duty or rechargeable batteries. To synchronize the units: 1. Bring both the sensor and display unit indoors and remove at least one battery from each. 2. Make sure the A-B-C switch on both units match. 3. Reinstall the battery in the outdoor sensor. 4. Reinstall the battery into the display unit. 5. Let the units sit within a couple of feet of each other for about 20 minutes to gain a strong connection.
Why are my ACU-RITE 00439DI Weather Station wind readings inaccurate?
Compare the wind reading to a sensor positioned at the same mounting height. Pro weather stations are typically mounted at 30 ft high or more. Check the location of the sensor, ensuring it’s mounted a minimum of 5 ft in the air with no obstructions around it (within several feet). Also, ensure the wind cups are spinning freely; if they hesitate or stop, try lubricating with graphite powder or spray lubricant.
What to do if ACU-RITE 00439DI Weather Station lost power and the time is not correct?
The Intelli-Time battery needs to be replaced. Once the new battery is installed, time and date will need to be set manually.
Why is my ACU-RITE 00439DI Weather Station forecast inaccurate?
The weather forecast icon predicts conditions for the next 12 to 24 hours, not current conditions. Learning Mode must complete before the forecast and pressure will be accurate. Allow the unit to run continuously for 33 days, as battery removal or resetting the display unit will restart Learning Mode. After 14 days, the forecast should be fairly accurate; however, Learning Mode calibrates for a total of 33 days.
Why is my ACU-RITE Weather Station barometric pressure inaccurate?
It may take up to 14 days for the pressure to calibrate to your location.
General| Power Source | 2 AA batteries (included) |
|---|---|
| Display Type | LCD |
| Humidity Range | 1% to 99% RH |
| Display | LCD |
| Features | Indoor and outdoor temperature and humidity |
Steps to prepare the weather station for use.
Lists all items included in the product packaging.
Instructions for registering the product for warranty.
Details the key components of the 3-in-1 wireless sensor.
Explains the included mounting hardware and bracket for the sensor.
Describes the various readings and icons on the display unit.
Identifies the buttons and switches on the back of the display unit.
Guides through setting up the 3-in-1 sensor, including A-B-C switch and batteries.
Covers setting up the display unit, including batteries and power adapter.
Instructions for configuring time, date, and measurement units.
Explains the different brightness levels and auto-dim mode.
Recommends optimal locations for the display unit and sensor.
Provides instructions for mounting the 3-in-1 sensor using various methods.
Explains the weather center's core functions and modes like Learning Mode.
Describes icons used for weather prediction and data interpretation.
Details pressure trends and moon phase indicators.
Explains wind speed readings and high/low records.
Solutions for lost outdoor sensor signal or no reception.
Addresses flashing outdoor temp, inaccurate forecasts, and calibration.
Troubleshooting for display issues, barometric pressure, and incorrect time.
Guidelines for cleaning the display unit and sensor, including insect/weather prep.
Steps to calibrate temperature, humidity, and pressure readings.
How to replace the coin-cell battery for time settings.
Lists operating ranges, power, and data reporting details.
Details regulatory compliance for radio frequency.
Contact information and warranty details for assistance.
