( SECTION 4 • PRODUCT SPECIFICATIONS
Measurement Ranges
Temperature
MainUnit:32°F to 122°F / o
0
cto 50°C
Wireless Sensor: -40°F to 158°F / -40°C to 70°C
Specifications
Power Requirements
Main Unit: 2 x "AAA" alkaline or lithium batteries
Wireless Sensor: 2 x "AA" alkaline or lithium batteries
Wireless Communication
Radio Frequency: 433 mhz
Transmission Intervals: every
16 seconds
PLEASEDISPOSEOFOLDORDEFECTIVEBATTERIESIN AN ENVIRONMENTALLYSAFE
WAYAND IN ACCORDANCEWITH YOURLOCALLAWSAND REGULATIONS.
BATTERYSAFETY:Followthepolarity(+/-)diagraminthebatterycompartment.Promptlyremovedeadbatteriesfromthe
device.DisP-oseofusedbatteriesproperly.Onlybatteriesofthesameorequivalenttypeasrecommendedareto be
used.DONOTincinerateusedbatteries.DONOTdisposeofbatteriesinfire,asbatteriesmayexplodeorleak.DONOTmix
oldandnewbatteriesortypesofbatteries(alkaline/standard).DONOTuserechargeablebatteries.DONOTrecharge
non-rechargeablebatteries.DONOTshort-circuitthesupplyterminals.
- 6 -
]
Toreceiveproduct information, register your product online. Ifs quick and easy!
Log on to
http://www.chaneyinstrument.com/product_reg.htm
LIMITEDONEYEARWARRANTY
Chaney Instrument Company warrants that all products it manufactures to be of good material and workmanship and to be free of
defects if properly installed and operated for a period of one year from date of purchase. REMEDYFORBREACHOFTHIS
WARRANTYIS EXPRESSLYLIMITEDTOREPAIRORREPLACEMENTOF DEFECTIVEITEMS. Any product which, under normal use
and service, is proven to breach the warranty contained herein within ONE YEARfrom date of sale will, upon examination by
Chaney, and at its sole option, be repaired or replaced by Chaney. In all cases, transportation costs and charges for returned
goods shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges.
This warranty will not be breached, and Chaney will give no credit for products it manufactures which shall have received normal
wear and tear, been damaged, tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than
authorized representatives of Chaney.
THEABOVE-DESCRIBEDWARRANTYIS EXPRESSLYIN LIEU OFALL OTHERWARRANTIES,EXPRESSORIMPLIED,AND ALL
OTHERWARRANTIESARE HEREBYEXPRESSLYDISCLAIMED,INCLUDINGWITHOUTLIMITATIONTHE IMPLIEDWARRANTYOF
MERCHANTABILITYAND THE IMPLIEDWARRANTYOFFITNESSFORA PARTICULARPURPOSE.CHANEYEXPRESSLYDISCLAIMS
ALL LIABILITYFORSPECIAL,CONSEQUENTIALORINCIDENTALDAMAGES,WHETHERARISINGIN TORTORBYCONTRACTFROM
ANY BREACHOFTHISWARRANTY.SOMESTATESDONOTALLOWTHE EXCLUSIONORLIMITATIONOFINCIDENTALOR
CONSEQUENTIALDAMAGES,SOTHEABOVELIMITATIONOREXCLUSIONMAYNOTAPPLYTOYOU.CHANEYFURTHERDISCLAIMS
ALL LIABILITYFROMPERSONALINJURYRELATINGTOITSPRODUCTSTOTHE EXTENTPERMITTEDBY LAW. BYACCEPTANCE
OFANYOFCHANEY'SEQUIPMENTORPRODUCTS,THE PURCHASERASSUMESALL LIABILITYFORTHE CONSEQUENCES
ARISINGFROMTHEIRUSEORMISUSE. NO PERSON,FIRM ORCORPORATIONISAUTHORIZEDTOASSUMEFORCHANEYANY
OTHERLIABILITYIN CONNECTIONWITHTHESALEOFITSPRODUCTS.FURTHERMORE,NO PERSON,FIRMORCORPORATIONIS
AUTHORIZEDTO MODIFYORWAIVETHETERMSOFTHIS PARAGRAPH,AND THE PRECEDINGPARAGRAPH,UNLESSDONEIN
WRITINGAND SIGNEDBYA DULYAUTHORIZEDAGENTOFCHANEY.THISWARRANTYGIVESYOUSPECIFICLEGALRIGHTS,AND
YOUMAYALSOHAVEOTHERRIGHTSWHICHVARYFROMSTATETOSTATE.
For in-warranty repair, please contact:
Customer Care Department
Chaney Instrument Company
965Wells Street
Lake Geneva,WI 53147
ChaneyCustomerCare
877-221-1252
Mon-Fri8:00 a.m. to 4:45 p.m. CST
www.chaneyinstrument.com
This device complies with part 15 of the FCCrules. Operation is
su~ect to the following_two conditions:
1- This device may NOTcause harmful interference, and
Fe
2- This device must accept any interference received, including
interference that may cause undesired operation.
NOTE:This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCCrules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, There is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Corne<=;tthe equipment into an outlet on a circuit different from that to which the
receiver 1sconnected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE:The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user authority to operate the
equipment.
Patent numbers: 5,978,738; 6,076,044; 6,597,990
- 7 -
To Previous Page
Loading...
