Instruction Manual
Specification:
- Indoor and outdoor temperatures displayed on the main LCD readout
- Temperature measurement range:
Indoor main unit: 32F – 122F (0 ºC ~ +50 ºC)
Wireless remote unit: -4 F – 130F (-20 ºC ~ +55 ºC)
- Temperature resolution: 0.1 degree
- Transmission range : up to 100ft. in an open area
Instruction manual:
ATTENTION:
For the fist installation, insert the batteries in the display unit and then in the remote sensor
Battery installation:
Display unit
Insert 2 fresh “AAA” alkaline batteries into the display unit. (Batteries not included)
Remote sensor
Insert 2 fresh “AAA” alkaline batteries into the remote sensor. (Batteries not included)
Getting started:
Indoor Display unit
When the batteries are put into the display unit, it will display the indoor temperature .The outdoor
reading “----”
Remote sensor
When the batteries are placed into the remote sensor, it will signal the temperature to the display unit.
The display unit will then be able to display the outdoor temperature. You may need to push the Reset
button on the back of the display unit.
Reset button
To Next Page
Need help?
General
