TROUBLESHOOTING
Log on to
www.chaneyinstrument.com
To receive product updates
and information,
PRODUCT REGISTRATION
Product Registration
SUPPORT
Problem
Bad
Wireless Sensor
Reception
Display Console
Screen Not Working
Possible Solution
no bars
Please DO NOT return product to the retail store.
For technical assistance and product return information, please call Customer
Care:
877-221-1252 Mon. - Fri. 8:00 A.M. to 4:30 P.M. (CST)
www.chaneyinstrument.com
Relocate the main unit and/or the wireless sensor.
Both units must be within 330 feet (100 meters)
from each other. Make sure both units are placed
at least 3 feet (.91 m) from other electronic
appliances and devices that may interfere with
the wireless communication (such as TV’s,
microwaves, computers etc). NOTE: It may take up
to 20 minutes for the main unit to re-synchronize
with the sensor when batteries are replaced. Use
lithium batteries in sensor when temperature is
below -4ºF (-20ºC).
Batteries may need replacing
Check that batteries are correctly installed
76
SPECIFICATIONS
5
330 ft / 100m MAX
Patent numbers: 5,978,738; 6,076,044; 6,597,990; US 7,637,141 B2
ACURITE
®
is a registered trademark of the Chaney Instrument Co.
Lake Geneva, WI
NOTICE: If the display fails to start properly, press the reset button
located on the back of the display unit. Please note that the date
and time information will need to be entered after a reset.
To Previous Page
Loading...
Need help?
General
