13
Replace Intelli-Time Battery
Intelli-Time technology is
powered by a pre-installed
coin-cell battery that stores
the time and date settings.
The battery has a shelf life of
several years. To replace the
Intelli-Time battery:
1. Locate the coin cell battery
compartment door on
the back of the display
unit, inside the battery
compartment. Unscrew and
remove the compartment
cover.
2. Insert 1 x CR2032 coin cell battery into the battery compartment, as shown.
Install battery with “+” positive terminal facing OUT.
3. Screw in the battery cover.
CR2032
3V
To Next Page
Loading...
