Need help?Do you have a question about the ACU-RITE III and is the answer not in the manual?
How to set internal switches for scale resolution, decimal point, etc.
Step-by-step guide for using the system in incremental mode.
Procedures for entering and using preset values for machining.
Examples of using tool offset for diameter and radius in machining.
Procedures for using both incremental and absolute modes together.
Procedures for measuring geometric errors like Abbé error.
How to apply computed error correction factors using console switches.
Guide to identifying and resolving system problems using tables.
How to set internal switches for scale resolution, decimal point, etc.
Step-by-step guide for using the system in incremental mode.
Procedures for entering and using preset values for machining.
Examples of using tool offset for diameter and radius in machining.
Procedures for using both incremental and absolute modes together.
Procedures for measuring geometric errors like Abbé error.
How to apply computed error correction factors using console switches.
Guide to identifying and resolving system problems using tables.
General| Display Type | LCD |
|---|---|
| Resolution | 320 x 240 pixels |
| Screen Size | 3.5 inches |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10-90% RH, non-condensing |
To Next Page
