Need help?Do you have a question about the ACU-RITE VUE and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Connectivity | Wireless |
| Wireless Frequency | 433 MHz |
| Touchscreen | No |
| Indoor Temperature Range | 32º to 122ºF; 0º to 50ºC |
| Operating Temperature | 32° to 122°F; 0° to 50°C (display unit); -4° to 158°F; -20° to 70°C (sensor) |
Explains the functions of the soft keys on the VUE readout.
Procedure to access machine parameter operations using an access code.
Covers software version, axis availability, symbols, and key representations.
Details the terms and conditions of ACU-RITE's 3-Year Hassle-Free Warranty.
Details the screen layout, status bar symbols, and VUE hard keys.
Describes operating modes, reference mark evaluation, and related functions.
Guide to viewing and changing job setup parameters like Units, Scale Factor, and Console settings.
Details key functions for milling, including Tool Table, Datum Setting, and Patterns.
Defines datum points and covers presets, absolute/incremental distance presets.
Covers circle patterns, linear patterns, incline, and arc milling.
Covers tool table, tool display icon, and setting tool offsets.
Defines datum points and details taper calculator and presets for turning.
Explains vectoring and radius/diameter display for turning operations.
Covers initial setup parameters, encoder setup, and display configuration.
Details axis coupling, Z coupling, and error compensation methods.
Covers compensation table management, backlash, system settings, and diagnostics.
Details voltage, power, frequency, environmental operating conditions, and fuse.
Covers protective earthing (grounding) and preventative maintenance.
Provides overview of dimensions and accessory ID numbers for mounting.
To Next Page
