VUE v
Readout Parameter Access Code
Readout Parameter Access Code
An access code must be entered before machine-related installation
parameters can be set or changed. This prevents inadvertent
adjustments to the installation setup parameters.
Access to Machine Parameter Operations
Refer to the Setup section also.
Begin by pressing the SETUP soft key.
Press the soft key INSTALLATION SETUP.
Press the access code numbers 8891 using the numeric key pad.
Press the ENTER key
The readout is now ready for machine parameter setting operations
IMPORTANT!
The access code is 8891.
IMPORTANT!
Supervisors may wish to remove this page from the
Reference Manual after initially setting up the readout
system. Retain in a safe place for future use.
To Next Page
Loading...
Need help?
General
