This dial consists of an upper part
(selector) and a lower part (dial).
Turning the dial left or right to select
or scroll through a list or item(s) on
the navigation display and adjust the
level or condition. Push the selector
to the left, right, up, and down to
scroll through and select a list or
item(s). The selected item will be
highlighted on the display. To
confirm the item or enter the setting,
push on the center of the selector
(ENTER).
Your vehicle has the interface dial on
the dashboard to operate the audio
system and navigation system. Most
functions of these systems can also
be controlled with the appropriate
buttons on the dashboard, but some
functions can be accessed or
selected with the interface dial only.
When you operate the audio system
with the interface dial, press the
AUDIObuttononthecontrolpanel
to show the audio control display on
the navigation display. You can scroll
the display and enter the setting with
the interface dial. You will see the
indicator , , ,
or on the display. This
indicates the direction to move the
interface dial.
You can operate the audio system
with the control buttons on the CD
changer unit without displaying the
audio control display on the
navigation display. The audio setting
will be shown on the upper display.
The audio system for your vehicle
can also be operated by voice control.
See the navigation section in your
quick start guide for an overview of
this system, and the navigation
system manual for complete details.
On RDX with Technology Package
model
Audio System
Interf ace Dial
Voice Control System
Features
189
ENTERSELECTOR
DIAL
０７／０６／０１ １８：５５：３６ ３１ＳＴＫ６１０ ０１９４
To Next Page
Loading...
Need help?
General
