EasyManua.ls Logo

Acura 2008 RDX - Wiper Blades

Acura 2008 RDX
434 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To replace a front wiper blade: Disconnect the blade assembly
from the wiper arm:
Raise each wiper arm off the
windshield, lifting the driver’s side
first, then the passenger’s side.
Check the condition of the wiper
blades at least every six months.
Replace them if you find signs of
cracking in the rubber, areas that are
getting hard, or if they leave streaks
and unwiped areas when used.
Press and hold the lock tab.
Slide the blade assembly toward
the lock tab until it releases
from the wiper arm.
When replacing a wiper blade,
make sure not to drop the wiper
blade or wiper arm down on the
windshield.
2.
1.
Wiper Blades
356
WIPER ARMS
Do not open the hood when the wiper
arms are raised, or you will damage the
hood and the wiper arms.
07/06/01 19:17:36 31STK610 0361 

Table of Contents

Other manuals for Acura 2008 RDX

Related product manuals