−
To activate AUTO SELECT, press
the AUDIO button to view the audio
control display. Push the interface
selector down to scroll down the
display, turn the dial to A. SEL, then
press ENTER on the interface
selector. You will see ‘‘AUTO SEL’’
flashing in the audio control display,
and ‘‘A. SEL’’ on the upper display.
Then, the system goes into scan
mode for several seconds.
If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons (icons) as previously
described.
The system stores the frequencies of
six AM and twelve FM stations in
the preset buttons.
To turn off auto select, press
ENTER on the interface selector
again. This restores the presets you
originally set.
You will see ‘‘0’’ displayed if auto
select cannot find a strong station for
every preset button.
For information on AM/FM radio
frequencies and reception, see page
.
For information, see page .
221
217
Audio System
AUTO SELECT
Radio Frequencies and Reception
Adjusting the Sound
Features
195
AUTO SEL INDICATOR
A.SEL ICON
０７／０６／０１ １８：５６：２０ ３１ＳＴＫ６１０ ０２００
To Next Page
Loading...
Need help?
General
