▲▼
▲▼ ▲▼
If you want to set the default settings,
press the INFO ( / ) button to
select DEFAULT ALL, then press
the SEL/RESET button.
To enter the customizing mode,
press and hold the INFO ( / )
button for more than 3 seconds.
When DEFAULT ALL is set, you will
see the above display for several
seconds, then the screen returns to
CUSTOMIZE ENTRY.
To set the default settings, press the
INFO ( / ) button to select SET
then press the SEL/RESET button.
CONTINUED
DEFAULT ALL
Multi-Information Display
Instruments and Controls
83
０７／０６／０１ １８：４２：０７ ３１ＳＴＫ６１０ ００８８
To Next Page
Loading...
