1. Move the front seats as far forward
as possible. Make sure the front
seat-backs are in the upright
positions.
2. Store the center seat belt buckle
into the pocket in the rear seat-
back.
3. Lower the head restraints to their
lowest positions.
4. Push the armrest back in place.
5. Lift the front edge of the rear seat
cushion, then pull up on the rear of
the seat cushion, then fold the
cushion forward.
6. Pull up the release lever on the
outside of the seat-back.
Fold the seat-back forward.
7. Move the front seats backward to
the desired position.
BUCKLE
RELEASE LEVER
CONTINUED
Seats
139
Instruments and Controls
09/07/07 15:02:04 10 ACURA RDX MMC North America Owner's M 50 31STK630 enu
To Next Page
Loading...
Need help?
General
