Elap. Time Reset Condition
There are three elapsed time reset
choices you can make:
IGN RESET － The elapsed time is
reset when you turn the ignition
switch to the LOCK (0) position.
TRIP A － The elapsed time is reset
when Trip A is reset.
TRIP B － The elapsed time is reset
when Trip B is reset.
While METER SETUP is shown in
the CUSTOMIZE GROUP of the
multi-information display, press the
SEL/RESET button. The screen
changes to CUSTOMIZE MENU.
Press the INFO (
/ ) button until
you see the above display.
Press the SEL/RESET button. The
screen changes as shown above.
Select the desired setting by
pressing the INFO (
/ ) button,
then press the SEL/RESET button to
enter your selection.
CONTINUED
Multi-Information Display
95
Instruments and Controls
09/07/07 15:02:04 10 ACURA RDX MMC North America Owner's M 50 31STK630 enu
To Next Page
Loading...
Need help?
General
