Acura 2012 RL User Manual

Remove the left or right side
engine compartment cover (see
page ).
Use a flat-tip screwdriver to
remove the holding clip from the
windshield washer reservoir.
(Passenger’s side)
Open the hood.
Ifyouarereplacingthebulbon
the driver’s side, remove the
battery cover (see page ).
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Pull the bulb straight out of its
socket.
Turn on the lights to make sure
the new bulb is working.
Reinstall the engine compartment
side cover.
Install the new bulb into the
socket.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Reinstall the windshield washer
reservoir.
(Driver’s side)
Reinstall the battery cover.
(Passenger’s side)
1.
2.
3.
4.
5.
6.
7.
8.
9.
457
492
10.
Lights
Replacing a Front Parking/Side
Marker Bulb
Maintenance
471
SOCKET
BULB
CLIP
11/07/20 19:02:13 31SJA670_476

Acura 2012 RL Specifications

General

Brand	Acura
Model	2012 RL
Category	Automobile
Language	English