*1:On the left: Models with full color display
On the right: Models without full color display
Message
*1
Condition Explanation
●
Appears when you attempt to start the engine with
the transmission not in (P.
●
To start the engine, the vehicle must be in (P.
●
Appears when you try to change the gear position
after the position has automatically been changed
to
(P with the driver’s door open and the driver’s
seat belt unfastened.
●
Press the park button If you leave the vehicle.
●
Appears when you change to (N, and press the
ENGINE START/STOP button within five seconds.
●
Appears when the vehicle is stopped with the
driver’s seat belt unfastened and there is a chance
that the vehicle may roll unintentionally.
●
The gear position remains in (N for 15 minutes,
then automatically switches to
(P.
2 If you want to keep the (N position in
ACCESSORY P. 334
●
Press the (P button before release the brake pedal
when idling, parking or exiting the vehicle.
2 Shift Operation P. 332
●
Appears when the engine stops without the shift
lever in (P, and does not restart automatically.
●
Appears if you open the hood while Auto Idle Stop
activates.
●
If you want to set the power mode to ON, move the
shift lever to (P.
●
If you want to start the engine, follow the normal
procedure.
2 Starting the Engine P. 322
To Next Page
Loading...
Need help?
General
