*1:On the left: Models with full color display
On the right: Models without full color display
Message
*1
Condition Explanation
●
Appears when you try to change the gear position
without depressing the brake pedal.
●
Depress the brake pedal, then select a shift button.
●
Appears when you try to change the gear position
without releasing your foot off the accelerator
pedal.
●
Release your foot off the accelerator pedal, then
select a shift button.
●
Appears when the (P button is pressed while the
vehicle is moving.
●
Appears if you change the gear position to (R while
the vehicle is moving forward, or to
(D while the
vehicle is reversing.
●
Make sure that the vehicle comes to a stop before
operating the select button.
—
●
Appears if there is a problem with the e-
pretensioner system
*
.
●
Have your vehicle checked by a dealer.
●
Appears when you set the power mode to ON
without fastening the driver’s seat belt.
●
Appears when you change the gear position after
(P has been automatically selected with the driver’s
door open, the driver’s seat belt unfastened, then
the brake pedal is released.
●
Fasten the seat belt properly before you start to
drive.
2 Shift Operation P. 332
To Next Page
Loading...
Need help?
General
