n Brightness Control
Adjust instrument panel brightness
when the vehicle is on.
To brighten: Press the + button.
To dim: Press the - button.
A beep sounds when the brightness
reaches its minimum or maximum.
n Interior Lights
Change the interior light settings using the switches on the ceiling.
ON position: Interior lights remain on.
Door-activated position: Interior
lights come on when any of the doors
are opened, the driver’s door is
unlocked, or the vehicle is turned off.
OFF position: Interior lights remain
off.
n Map Lights
Press the front map lights to turn on or
off.
VEHICLE CONTROLS
34 |
n Exterior Lights
Rotate the switches on the lever to
operate the exterior lights. Push the
lever forward to turn on the high
beams. Return the lever to its original
position for low beams.
OFF: All exterior lights are off.
Turn on exterior lights except headlights.
AUTO: Turn on the automatic lighting feature. Headlights turn on or off
depending on ambient brightness when the vehicle is on.
Headlights automatically come on after the wipers are engaged
for a certain time. The headlights come on when you unlock a
door in dark areas with the headlight switch in AUTO.
Turn on all exterior lights including headlights.
Turn fog lights
*1
on or off.
One-Touch Turn Signal
Use this quick and convenient method to
signal a lane change.
Lightly push the turn signal lever up or
down for a three-blink sequence.
For a continuous signal, push the lever up
or down until it locks into place.
Auto High Beam System
*1
Automatically changes the low beam headlights to high beam headlights
when necessary.
n How It Works
When you are driving at night above 45mph (72 km/h) and the headlight
lever is in the low beam position with the switch rotated to AUTO, the
*1 - If equipped
VEHICLE CONTROLS
| 35
To Next Page
Loading...
