NAVIGATION
Learn how to enter a destination and operate the navigation system
*1
.
Basic Navigation Operation
A real-time navigation uses GPS and a map database to show your current
location and help guide you to a desired destination. You can operate the
system using voice commands or the system controls.
To reduce the potential of driver distraction, certain manual functions may
be inoperable or grayed out while the vehicle is moving. Voice commands
are always available.
n Steering Wheel Controls
Use the steering wheel controls to give voice commands.
Hang-Up/Back button: Press to cancel a command or operation.
Talk button: Press to say navigation commands from the Voice Portal
screen.
n Talk Button Tips
The system recognizes commands in the Voice Command Index, see Voice
Portal Commands.
• When using the Talk button, wait for a beep before saying a command.
• To bypass the system prompts, simply press the Talk button again to say
your command.
• Speak in a clear, natural voice.
• Reduce all background noise.
• Adjust the dashboard vents away from the microphone in the ceiling.
• Close the windows and moonroof
*1
.
n
System Guidance Volume
*1 - If equipped
NAVIGATION
66 |
Adjust the navigation system guidance
volume. This does not affect audio or
Bluetooth
®
HandsFreeLink
®
volume,
which is controlled by the volume
knob. Use the interface dial to make
and enter selections.
1. Press SETTINGS.
2. Select System Settings.
3. Select Feedback.
4. Adjust the volume to your preferred level.
n Navigation Display and Controls
Touch icons on the screen to enter information and make selections.
Entering Your Destination
There are several methods to enter a destination.
NAVIGATION
| 67
To Next Page
Loading...
