Lane Keeping Assist System (LKAS)
Provides steering input to help keep the vehicle in the middle of a detected
lane and provides audible and visual alerts if the vehicle is detected drifting
out of its lane while driving between 45–90 mph (72–145 km/h).
A camera mounted between the windshield and the rearview mirror
determines if your vehicle begins to move away from the center of a detected
lane while driving between 45–90 mph (72–145 km/h).
If you cross a detected lane line without
using your turn signal, a message appears
on the MID.
Light steering torque and vibrations are
applied to keep your vehicle in the middle
of the lane.
n Turning the System On or Off
1. Press the MAIN button. LKAS
appears in the Multi-Information
Display.
2. Press the LKAS button. Lane
outlines appear in the Multi-
Information Display . Dotted lane
lines turn solid when the system
activates.
3. Press the MAIN button or the LKAS
button to turn the system off.
n Important Safety Reminder
LKAS is for your convenience only. It is not a substitute for your vehicle
control. The system does not work if you take your hands off the steering
wheel or fail to steer the vehicle.
Do not place an object on the top of the instrument panel. It may reflect
onto the windshield and prevent the system from detecting lane lines
properly.
Road Departure Mitigation (RDM)
A camera mounted between the windshield and the rearview mirror
determines if your vehicle begins to cross over detected lane markings while
driving between 45–90 mph (72–145 km/h).
DRIVING
86 |
If you get too close to a detected lane line
without using your turn signal, a message
appears in the MID.
Steering wheel torque and vibrations are
applied to help your vehicle stay in the
lane. Braking may also be applied if the
lane lines are solid and continuous.
n Turning the System On or Off
Press the RDM button to turn the
system on or off. A green indicator
appears on the button when the
system is on.
n Changing Settings
Determine the warning timing, or turn the system off. Use the interface
dial to make selections.
1. From the Home screen, press the Select Settings App.
2. Select Vehicle. The vehicle must be in Park (P).
3. Select Driver Assist System.
4. Select Road Departure Mitigation Setting.
n Important Safety Reminder
The RDM system has limitations. Over-reliance on it may result in a
collision. It is always your responsibility to keep your vehicle within the
driving lane.
Collision Mitigation Braking System
™
(CMBS
™
)
Can assist you when there is a possibility of your vehicle colliding with a
vehicle or a pedestrian detected in front of yours. The CMBS
™
is designed to
alert you when a potential collision is determined, as well as to reduce your
vehicle speed to help minimize collision severity when a collision is deemed
unavoidable.
DRIVING
| 87
To Next Page
Loading...
