AUDIO AND CONNECTIVITY
Learn how to operate the vehicle’s audio system.
Basic Audio Operation
Connect audio devices and operate buttons and displays for the audio system.
n USB Port
Connect a USB device, such as a flash drive, iPod
®
or iPhone. The USB port
(2.5A) is for charging devices, playing audio, and using Apple CarPlay or
Android Auto.
1. Open the center pocket.
2. Open the port cover and attach the
device to the USB connector.
n
Auxiliary Input Jack
Connect the standard audio devices with a 1/8 inch (3.5 mm) stereo
miniplug.
1. Open the AUX cover.
2. Insert the miniplug attached to the
audio device into the jack. The
audio system switches to AUX
mode. Use the device to control the
audio.
n Accessory Power Socket
Open the socket cover to use power when the vehicle is on.
AUDIO AND CONNECTIVITY
50 |
You can use the accessory power
socket when the vehicle is on. Open
the lid in the front pocket to access the
socket.
An additional power socket is located
in the center console
*1
.
Do not insert an automotive type
cigarette lighter element. This can overheat the power socket.
To prevent battery drain, use the power socket only when the engine is
running.
n Audio Remote Controls
You can operate certain functions of the audio system using the steering
wheel controls.
SOURCE Button: Cycle through
available audio modes.
Left selector wheel: Roll up or down
to adjust volume. Press to mute. Move
(or hold) left or right to change
stations or tracks.
Move right or left for the next or
previous station. Move and hold right
or left for the next or previous strong
station.
CD/HDD/iPod/USB/Bluetooth
®
Audio
Move right or left for the next or previous track. Move and hold right or
left for the next or previous folder (CD/USB).
Pandora
®
*13
Move right for the next song. Move and hold right or left for the next or
previous station.
n Adjusting the Sound
Use the interface dial to select and adjust various sound settings.
*1 - If equipped
*13 - US models only, if equipped
AUDIO AND CONNECTIVITY
| 51
To Next Page
Loading...
