113
uuLocking and Unlocking the DoorsuKey
Continued
The built-in key can be used to lock/unlock the
doors when the keyless access remote battery
becomes weak and the power door lock/
unlock operation is disabled.
To remove the built-in key, slide the release
knob and then pull out the key. To reinstall
the built-in key, push the built-in key into the
keyless access remote until it clicks.
■
Built-in Key
Models without two-way keyless
access remote
Models with two-way keyless access
remote
21 ACURA ILX-31TX66800.book 113 ページ ２０２０年８月４日 火曜日 午後７時３３分
To Next Page
