152
uuOperating the Switches Around the Steering WheeluBrightness Control
Brightness Control
When the power mode is in ON, you can use
the brightness control knob to adjust
instrument panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.
You will hear a beep when the brightness
reaches minimum or maximum. Several
seconds after adjusting the brightness, you
will be returned to the previous display.
■
Brightness level indicator
The brightness level is shown on the display
while you are adjusting it.
1Brightness Control
The brightness of the instrument panel will be
reduced when the following conditions:
• The power mode is in ON.
• The light switch is in any position other than OFF
and it is dark outside.
The brightness can be set differently for when the
exterior lights are on, and when they are off.
21 ACURA ILX-31TX66800.book 152 ページ 2020年8月4日 火曜日 午後7時33分