534
uuReplacing Light BulbsuBack-Up Light Bulbs
Back-Up Light Bulbs
When replacing, use the following bulbs.
1. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
2. Turn the socket counter-clockwise and
remove it.
3. Remove the old bulb and insert a new bulb.
Back-Up Light: 16 W
21 ACURA ILX-31TX66800.book 534 ページ ２０２０年８月４日 火曜日 午後７時３３分
To Next Page
