74
uuIndicatorsu
Indicator Name On/Blinking Explanation Message
Malfunction
Indicator Lamp
●
Comes on when you set the power
mode to ON, and goes off either
when the engine starts or after
several seconds if the engine did not
start. If “readiness codes” have not
been set, it blinks five times before it
goes off.
●
Comes on if there is a problem with
the emissions control system.
●
Blinks when a misfire in the engine's
cylinders is detected.
●
Readiness codes are part of the on board
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 607
●
Comes on while driving - Have your
vehicle checked by a dealer.
●
Blinks while driving - Stop in a safe place
where there are no flammable objects. Stop
the engine for 10 minutes or more, and
wait for it to cool down. Then, take the
vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 593
Charging System
Indicator
●
Comes on when you set the power
mode to ON, and goes off when the
engine starts.
●
Comes on when the battery is not
charging.
●
Comes on while driving - Turn off the
climate control system and rear defogger in
order to reduce electricity consumption.
2 If the Charging System Indicator
Comes On P. 592
21 ACURA ILX-31TX66800.book 74 ページ ２０２０年８月４日 火曜日 午後７時３３分
To Next Page
Loading...
