143
uuTroubleshootingu Map, Voice, Entering Destinations
The voice control system is having difficulty
recognizing my voice commands.
Check that the vents are not blowing air onto the microphone on the ceiling, the
vehicle is as quiet as possible, and you are using the correct command when
speaking.
2 Voice Recognition P. 23
I cannot give voice commands. Make sure you pressed at the Startup Confirmation screen.
2 Start-up P. 20
I cannot select an option using the Interface
Dial.
To reduce potential driver distraction, certain onscreen functions and features are
limited or inoperable while the vehicle is moving. Use voice commands or pull over
to proceed.
The navigation system pronunciation of
street names in the guidance command or
destination address sounds strange.
The basic guidance phrases use a studio-recorded voice, but street names are
pronounced using a machine-generated voice. Consequently, the name may be
mispronounced or sound strange at times.
The screen is bright when I drive at night. 1. Check that the nighttime dashboard brightness control is not set to maximum.
2. Press the SETTINGS button. Select Navigation Settings > Map > Color
(Night).
2 Color P. 56
The screen is dark when I drive during the
day.
Press the SETTINGS button. Select Navigation Settings > Map > Color (Day).
2 Color P. 56
How do I change or remove my PIN? 1. Press the SETTINGS button. Select Navigation Settings > Personal Info > PIN
Number > Address Book PIN or Go Home PIN.
2. Enter your existing PIN. You then have the choice to change or remove the PIN.
2 PIN Numbers P. 32
I have forgotten my PIN. How do I reset the
PIN for Home or the PIN for personal
addresses?
A dealer must reset the PIN for you.
Problem Solution
18 ACURA MDX NAVI-31TZ58400.book 143 ページ ２０１７年８月８日 火曜日 午前１１時５０分
To Next Page
Loading...
Need help?
General
