142
Troubleshooting
Map, Voice, Entering Destinations
Problem Solution
The Startup Confirmation screen is displayed
every time I start the vehicle.
This is normal. The Startup Confirmation screen reminds you and your guest
drivers to always operate the navigation system in a safe manner. The Startup
Confirmation screen goes off after a certain period of time and the top screen of
the last mode is displayed.
The navigation system reboots by itself
(returns to the opening screen).
A reboot can be caused by extreme temperatures or shock from bumpy roads, and
does not necessarily indicate a problem. If this happens frequently, please see a
dealer.
How do I specify a destination when an
entered city or street could not be found?
●
Try entering the street first. Some cities are lumped in with a major metro area.
In rural “unverified” areas or new subdivisions, streets may be missing or only
partially numbered.
●
Try selecting the destination directly from the map.
2 Select using Map P. 96
How do I delete Personal Addresses,
Previous Destinations, or the Home Address?
1. Press the SETTINGS button. Select Navigation Settings > Personal Info to
display the types of information.
2. Select the type of address to delete.
2 Address Book P. 25
2 Home Address P. 31
2 Previous Destination P. 33
I cannot hear the navigation system voice. 1. Press the SETTINGS button. Select System Settings > Feedback and check
that Guidance Volume is not set to 0.
2. Select System Settings > Voice Reco. and set Voice Prompt to On.
Why is Call grayed out on the Calculate
Route screen?
Your phone is not paired to Bluetooth® HandsFreeLink® or, if paired, your phone
is in use. See your Owner’s Manual.
18 ACURA MDX NAVI-31TZ58400.book 142 ページ ２０１７年８月８日 火曜日 午前１１時５０分
To Next Page
Loading...
Need help?
General
