Acura MDX 2018 User Manual

150
Reference Information
System Initialization
The navigation system must be initialized if
power to the navigation system is
interrupted for any reason (e.g., the battery
was disconnected).
Entering the Security Code
In most cases, you do not need to enter a
security code. Follow the steps below to
reactivate the system.
1. Set the power mode to ON, and turn on
the audio system.
2. Press and hold the (Power) button for
more than two seconds.
u The system is reactivated when the
system’s control unit recognizes that
the system is in your vehicle.
If the control unit fails to recognize,
you must go to a dealer and have the
system checked.
Acquiring GPS Information
Depending on the length of time the power
was interrupted, your system may require
GPS initialization.
If initialization is not necessary, the system
proceeds directly to the Startup
Confirmation screen.
If the system fails to locate a sufficient
number of satellites to locate your position
within 10 minutes, the following screen is
displayed.
If you are experiencing GPS reception
problems:
2 GPS P. 152
18 ACURA MDX NAVI-31TZ58400.book 150 ページ ２０１７年８月８日 火曜日 午前１１時５０分

Acura MDX 2018 Specifications

General

Navigation System	Standard
Screen Size	8-inch
Voice Recognition	Yes
Real-Time Traffic	Yes
Traffic Rerouting	Yes
Touchscreen	Yes
Lane Guidance	Yes
3D Building Views	Yes
Display Type	LCD
Voice Control	Yes
Real-Time Traffic Updates	Yes
3D Map View	Yes
Points of Interest (POI)	Yes
HD Radio	Yes
SiriusXM Satellite Radio	Yes
Bluetooth Connectivity	Yes
USB Ports	Yes
AcuraLink	Yes
Multi-View Rear Camera	Yes
Smartphone Integration	Apple CarPlay and Android Auto