1Locking the doors and tailgate (Walk away auto lock®)
Auto lock function operation stop beeper
After the auto lock function has been activated, the
auto lock operation stop beeper sounds for
approximately two seconds in the following cases.
• The keyless access remote is put inside the vehicle
through a window.
• You are located too close to the vehicle.
• The keyless access remote is put inside the tailgate.
If the warning beeper sounds, check that you are
carrying the keyless access remote. Then, open/close
a door and confirm the auto lock activation beeper
sounds once.
To Next Page
Loading...
Need help?
General
