592
Turbo Engine Vehicle
*
Handling Precautions
The turbocharger is a high-precision device to obtain greater horsepower by
delivering a large volume of compressed air into the engine using a turbine driven by
the engine’s exhaust gas pressure.
• When the engine is cold just after starting, avoid hard or sudden acceleration.
• Always replace the engine oil and engine oil filter according to the Maintenance
Minder
TM
.
• The turbine rotates at very high speeds over 100,000 rpm and its temperature
reaches over 1,292°F (700°C). It is lubricated and cooled by engine oil. If you fail
to replace the engine oil and filter at the scheduled distance or interval,
deteriorated engine oil may cause failure such as sticking and abnormal noise of
the turbine bearing.
1Turbo Engine Vehicle
*
The scheduled maintenance intervals for replacing
the filter is indicated on the driver information
interface. Follow the information on replacement
timing.
2 Maintenance Minder
TM
P. 597
The temperature gauge pointer is at the upper level
when you restart the engine after driving under high
load conditions such as at high speed or in hilly
terrain. This is normal. The gauge goes down after
you idle or drive the vehicle for about one minute.
* Not available on all models
24 ACURA MDX-31TYA6200.book 592 ページ ２０２３年３月２日 木曜日 午後１２時４４分
To Next Page
Loading...
Need help?
General
