EasyManua.ls Logo

Acura MDX 2024 - Inspecting and Changing Fuses

Acura MDX 2024
748 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
714
uuFusesu
Inspecting and Changing Fuses
Handling the Unexpected
Inspecting and Changing Fuses
1. Set the power mode to VEHICLE OFF
(LOCK). Turn headlights and all accessories
off.
2. Remove the fuse box cover.
3. Check the main fuse in the engine
compartment fuse box type A.
u Look at the fuse through the hole.
u If the fuse is blown, have it replaced by a
dealer.
1Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Use the charts to locate the fuse in question and
confirm the specified amperage on the fuse label.
2 Fuse Locations P. 706
Replace with a fuse of the same specified amperage.
There is a fuse puller on the back of the engine
compartment fuse box type A cover.
Main Fuse
Hole
3.5 L engine models
24 ACURA MDX-31TYA6200.book 714 ペー 2023年3月2日 木曜日 午後12時44

Table of Contents

Other manuals for Acura MDX 2024

Related product manuals