uuOperating the Switches Around the Steering WheeluDriving Position Memory System
188
1. Set the power mode to ON. Adjust the
driver’s seat, front passenger’s seat
*
,
massage mode
*
, the steering wheel
*1
and
the door mirrors
*1
to the desired position.
2. Press the SET button.
u You will hear the beeper, and the
memory button indicator light will blink.
3. Press and hold memory button
(1, (2, or
(3 within five seconds of pressing the SET
button.
u Once the seat, massage mode
*
, the
steering wheel
*1
and the door mirror
*1
positions have been memorized, the
indicator light on the button you pressed
stays on and you will hear the double-
beep.
*1: Driver’s seat only
■
Storing a Position in Memory
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
• You do not press the memory button within five
seconds.
• You readjust the seat, the steering wheel
*1
or the
door mirror
*1
position before the double-beep.
• You set the power mode to any position except
ON.
• You press the mode selector up or down.
Models with mode selector
Memory Button 1
Memory Button 2
SET Button
Memory Button 3
* Not available on all models
24 ACURA MDX-31TYA6200.book 188 ページ ２０２３年３月２日 木曜日 午後１２時４４分
To Next Page
Loading...
Need help?
General
