with braking.
braking will not work when reversing.
1Low Speed Braking Control
*
For directions on the proper handling of the sonar
sensors, please refer to the following page.
2 Sonar Sensors
*
P. 557
The vehicle will release the brake and start moving a
few seconds after the system is activated. To keep the
vehicle stopped, keep the brake pedal depressed or
put the transmission into
(P.
In order to prevent the system from activating when
not needed, always turn it off during vehicle
maintenance, when loading on ships, trucks, and so
on, or when using a chassis dynamometer, free
rollers for inspection or when washing the car in
conveyor type car wash machine.
If you put any accessories on or around the rear
sensors, the Low Speed Braking Control System may
activate if it detects these accessories as an obstacle.
In this case, turn off the rear sensor.
2 Turning off All Rear Sensors P. 573
To Next Page
Loading...
Need help?
General
