92
uuIndicatorsu
Indicator Name On/Blinking Explanation
Transmission
System Indicator
• The current gear selection blinks if the
transmission system has a problem.
• Blinks while driving - Performance may be
reduced. Avoid sudden starts and acceleration and
have your vehicle checked by a dealer immediately.
• The indicated current gear selection blinks if
you cannot put the transmission into (R due
to a transmission system failure.
• The indicated current gear selection blinks if
the transmission system has a problem and
the performance of the vehicle is reduced.
• Avoid sudden starts, sudden acceleration and high
speed, and have your vehicle checked by a dealer
immediately.
• The indicated current gear selection blinks if
the transmission system has a problem and
the paddle shifters cannot be used.
• Have your vehicle checked by a dealer immediately.
• The current gear position or all the gear
positions blink if there is a problem with the
transmission and the vehicle is no longer
able to run.
• Immediately park your vehicle in a safe place.
2 Emergency Towing P. 717
• Have your vehicle checked by a dealer.
• The current gear position or all the gear
positions blink if there is a problem with the
transmission and it is not possible to select
(P.
• Depending on the circumstances, you can set the
power mode to ON as an emergency measure.
2 If the Transmission System Indicator Blinks
along with the Warning Message P. 705
• While the vehicle is stopped, apply the parking
brake.
• Have your vehicle checked by a dealer immediately.
24 ACURA MDX-31TYA6200.book 92 ページ ２０２３年３月２日 木曜日 午後１２時４４分
To Next Page
Loading...
Need help?
General
