99
uuIndicatorsu
Continued
Indicator Name On/Blinking Explanation Message
Road Departure
Mitigation (RDM)
Indicator
●
Comes on for a few seconds
when you set the power mode to
ON, then goes off.
●
Comes on if there is a problem
with the RDM system.
●
Stays on constantly - Have your vehicle
checked by a dealer.
●
Comes on when the RDM system
shuts itself off.
●
Stays on - The temperature inside the camera
is too high.
Use the climate control system to cool down
the camera.
The system activates when the temperature
inside the camera cools down.
2 Front Sensor Camera P. 475
●
Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your vehicle in
a safe place, and wipe it off with a soft cloth.
●
Have your vehicle checked by a dealer if the
indicator and message come back on after
you cleaned the area around the camera.
2 Front Sensor Camera P. 475
18 ACURA MDX E-AWD-31TRX6100.book 99 ページ ２０１７年１１月１０日 金曜日 午前１０時２１分
To Next Page
Loading...
