uuWhen DrivinguTurning on the Power
462
1. Depress the brake pedal and press the POWER button simultaneously.
2. Keeping your right foot on the brake pedal, press the button. Select
(R
when reversing.
3. With the parking brake applied, release the brake pedal and gently depress the
accelerator pedal.
u Make sure the electric parking brake indicator goes off.
2 Parking Brake P. 517
2 If the Transmission System Indicator Blinks along with the Warning Message
P. 645
■ Hill start assist system
Hill start assist keeps the brake engaged briefly to help prevent the vehicle from
rolling on inclines as you move your foot from the brake pedal to the accelerator.
Change the gear position to
(D or (S when facing uphill, or (R when facing
downhill, then release the brake pedal.
■
Starting to Drive
1Starting to Drive
The power system is turned off when the gear
position is changed from
(P before the POWER
button is pressed. Follow the step 1 when starting to
drive.
You can also release the parking brake by pulling the
electric parking brake switch while depressing the
brake pedal.
When facing downhill, you can start your vehicle
more smoothly by manually releasing it with the
electric parking brake switch than by releasing it with
the accelerator pedal.
When the power system was started using the two-way
keyless access remote
When the power system was started using the two-way keyless access remote
When the power system was started in any case
1Hill start assist system
Hill start assist may not prevent the vehicle from
rolling downhill on a very steep or slippery slope, and
will not operate on small inclines.
Hill start assist is not a replacement for the parking
brake.
18 ACURA MDX E-AWD-31TRX6100.book 462 ページ ２０１７年１１月１０日 金曜日 午前１０時２１分
To Next Page
Loading...
Need help?
General
